Service & O&M Cabins
Operating base for site teams: control room, maintenance workshop, spares and welfare.
- Envelope
- 20ft / 40ft
- Control positions
- 2 – 4
- Network
- Fibre and copper entry
- Workshop
- Bench and tool storage
What sits inside
Control room, workshop and spares
A service cabin turns a cabin array into an operable site. It carries the control desk, network entry, spare parts storage, a small workshop and welfare facilities, so technicians do not need a separate permanent building.
Reference configuration
- Envelope
- 20ft / 40ft
- Control positions
- 2 – 4
- Network
- Fibre and copper entry
- Workshop
- Bench and tool storage
- Welfare
- WC and rest area
- Monitoring
- Site-wide DCIM display
Final configuration subject to project design
Control desk
Operator screens for power, cooling and IT.
Comms room
Carrier entry, routers and patch panels.
Spares store
Shelving for CRAC, PSU and network spares.
Workshop
Bench, vice and test equipment.
How it connects
Each cabin exposes a defined set of interfaces. The boundary is agreed before fabrication.
Where it is used
Unmanned site
Remote monitoring with periodic visits.
Multi-cabin campus
Central operations point for all blocks.
Maintenance base
On-site workshop for spare replacement.
Technical package on request
Specification sheets, layout drawings and compliance notes for this system are shared with qualified project teams. Tell us the site and the load case, and we send the applicable set.
- +System specification sheet
- +Layout and interface drawings
- +Compliance and test notes
Related systems
Specify this system
Send the load, redundancy level and site conditions. We will confirm the cabin configuration.